Siemens Solar Panels direct from Bullnet
main top
sm6
language
module
main nav

Outstanding Power Performance
The SR100 / SR90 solar photovoltaic modules efficiently generate power by converting the energy contained in sunlight directly into electricity. They have no moving parts, operate silently, use no fuel, and produce no waste. Built for long-term dependability, the SR100 / SR90 have a twenty-five year limited warranty on power output.

The SR100 and SR90 datasheets are also available in the Adobe Acrobat (.PDF) format.

SR100/SR90

Electrical Parameters 1

Maximum power rating

Minimum power rating

Rated current

Rated voltage

Short circuit current

Open circuit voltage

Pmax

Pmin

Imp

Vmp

Isc

Voc

Thermal Parameters

Nominal operating cell temperature2

Change of Isc with temperature,

Change of Voc with temperature,

Qualification Test Parameters3

Temperature cycling range

Humidity, freeze, damp heat condition

Maximum system voltage

Wind loading or surface pressure

Maximum distortion4

Hailstone impact withstand
(diameter @ velocity)

Physical Parameters

Number of series cells

Length

Width

Depth (w/o box)

Weight

Warranty5

Power >= 90% of minimum power

Power >= 80% of minimum power

 

[Watts]

[Watts]

[Amps]

[Volts]

[Amps]

[Volts]

 

[°C]

 

 

 

[°C]

[% RH]

[Volts]

[N/m²] (PSF)

[degrees]

[mm @ m/s]
(in @ MPH)

 

 

[mm] (in)

[mm] (in)

[mm] (in)

[kg] (lbs)

 

[Years]

[Years]

SR100

12V

6V*

100

90

5.6

17.7

6.3

22.0

11.2

8.85

12.6

11.0

SR90

12V

6V*

90

80

5.4

17.0

6.1

21.6

10.8

8.5

12.2

10.8

 

45

+2.1mA/°C (+0.04%/°K)

-0.079 Volts/°C (-0.34%/°K)

 

-40 to +85

85

1000 per ISPRA (EC) [pending],
600 per UL 1703

2400 (50)

1.2

25 @ 23
(1.0 @ 52)

 

36

1498 (59.0)

594 (23.4)

40 (1.6)

10.9 (24.0)

 

10

25

*

If the designer chooses to use the 6-volt version in a high voltage array configuration, the designer must install custom large bypass diodes and heat sinks around every 6-volt parallel string.

1

Determined under standard test conditions (STC): Irradiance = 1000w/m² cell temperature = 25 °C; solar spectral irradiance per ASTM E892 (Air Mass = 1.5).

2

Determined under nominal operating conditions (NOC): Irradiance = 800 w/m² ambient temperature = 20 °C; wind speed = 1m/s.

3

Qualification Tests performed as per CEC 503 Test Specification, to ensure durability and performance in outdoor conditions.

4

Diagonal lifting of module corner with three corners fixed.

5

To original consumer purchaser. See full Limited Warranty for all conditions.